High Expansion Gauge Hanger.

The Omega High Expansion Gauge Hanger is used for hanging off gauges and other tools in a well. Designed for use in tubing with no nipple profiles, the gauge hanger provides a platform to hang gauges from while at the same time constituting a negligible flow restriction. The tool can also be used as an anchor to prevent unwanted movement of, for example, abandoned equipment in flowing wells.

Two bi-directional slip modules allow loads in either direction and self centralise the tool on setting. On retrieval the slips are positively retracted from the tubing/casing wall to their running position. The gauge hanger can be run on slickline or electric cable and is set using standard setting tools. Retrieval is with a JDC pulling tool for simplicity.

The gauge hanger comes in three chassis sizes: 1.5”, 2.0”, and 2.88” OD`s. Conversion kits enable the gauge hanger to be set in a range of tubing sizes from 2 7/8” through to 9 5/8”.

Click here to view PDF data sheet.

Features

  • High expansion.
  • Low flow restriction.
  • Self centralising.
  • High load capacity.
  • Setting and retrieval on standard slickline or electric cable tools.
  • Short tool string.

 

Applications
  • Memory gauge hanger.
  • Anchor for downhole tool.
  • Anchor for debris subs.
  • Anchor for M-PLT’s used for stationary logging in cased hole.
  • Anchor for downhole sampling tools.
  • Anchor for inflatable / swellable tools.
  • Anchor for perforation guns.

 

Benefits
  • Provides an extremely low flow restriction.
  • Allows Gauges to be deployed without the need of a nipple profile.
  • Eliminates debris build up, enhancing retrievability after long term deployment.
  • Minimal redress requirement due to robust design.
  • Retrieved by standard wireline methods.
Technical Specifications.
Casing Tool OD Flow Area
Restriction.
OD Wt lbs/ft
2-7/8" 6.4-11.5

1-1/2"

 52%
3-1/2" 7.7-17 39%
4" 13.2-22.2 33%
4-1/2" 11.6-26.1 28%
4" 9.5 2.0" 42%
4-1/2" 10.5-15.1 40%
5" 15-18 35%
5-1/2" 15.5-26 30%
6-5/8" 20-32 23%
7" 26-42.7 22%
4-1/2" 10.5-12.6 2.88" 69%
5" 15-23.2 56%
5-1/2" 15.5-26 50%
6-5/8" 20-32 38%
7" 23-38 36%
9-5/8" 40-53.5 25%

 

• Setting tool: Any standard slickline / electric cable setting tool.

• Pulling tool: JDC Type.

• Material: Any NACE compatible material for sour well conditions.

For more information please click here to contact one of our sales team.