Hydrostatic Setting Tool.

The Omega Hydrostatic Setting Tool addresses the industry need for a non-pyrotechnic setting device for downhole use. The setting tool converts the hydrostatic pressure at the tool into an axial force. The short overall length of the tool has been achieved by incorporating a high volume low-pressure piston and a low volume high-pressure piston into the setting tool. This combined with a unique regulating device allows the hydrostatic well pressure to be boosted within the tool providing a force of 27,500 lbs from every 1,000 psi well pressure with the Dual Piston 3.600” OD tool.

The setting tool has been designed to run on slickline and e-line but can also be adapted for coil tubing and pipe applications. The setting tool can be quickly converted from slickline to e-line deployment on the rig site by replacing two components at the top of the tool.

When run on slickline a timer is used, which features an external switch allowing the timer to be started just before the tool string is picked up. The lower end of the setting tool will make up to existing wireline adapter kits for a Baker E4.

In the event of insufficient hydrostatic pressure being present an Omega pressure module may be run on top of the setting tool to provide sufficient input pressure. This would only be required if it were not possible to apply pressure from surface. The Hydrostatic Setting Tool is ideally suited to tree change out operations where pressure may be applied against a deep-set plug.

The Omega Hydrostatic Setting Tool provides a highly cost effective alternative to pyrotechnic setting tools. The slickline timer is powered by two AA cell Lithium batteries, which require no dangerous goods certification for transportation. This combined with its short length makes it ideal for transportation by helicopter.

Click here to view PDF data sheet.

Features

  • Accurate time delay mechanism.
  • Large output forces generated.
  • High Pressure / High Temperature HST`s available.
  • Large “Stroke” capability.
  • Extensive track record.

 

Applications
  • Bridge Plug setting.
  • Straddle setting.
  • High Expansion Gauge Hanger setting.

 

Benefits

  • Non pyrotechnic
  • Reduces risks associated with Wireline mechanical manipulation.
  • Setting force is applied in a controlled manner.
  • Field redressable.

 

 

 

 

 

 

 

 

 

 

 

 

Clean Out Valve Ortho
Technical Specifications
Tool Size 2.250" 2.700" 3.500" 3.600"
(Dual Piston)		 3.600"
(Single Piston)		 4.00" HP/HT 4.125"
Upper Connection (Slickline) 15/16" UNS 1-1/16" UNS 1-1/16" UNS 1-1/16" UNS 1-1/16" UNS 1-1/16" UNS 1-1/16" UNS
Upper Connection (E-Line) 1-3/16"
Gearhart-Owen		 1-3/16"
Gearhart-Owen		 1-3/16"
Gearhart-Owen		 1-3/16"
Gearhart-Owen		 1-3/16"
Gearhart-Owen		 1-3/16"
Gearhart-Owen

1-3/16"
Gearhart-Owen
Lower Connections Proprietary As size 10 Baker E4 As size 10 Baker E4 As size 20 Baker E4 As size 20 Baker E4 As size 20 Baker E4 As size 20 Baker E4
OD 2.250" 2.700"
(Special 2.650" available on request)		 3.500" 3.859" 3.859" 4.00" 4.125"
Length 90.00" 88.00" 184.50" 88.00" 109.00" 98.60" 98.00"
Stroke 7.00" 7.00" 31.00" 13.00" 13.00" 10.00" 13.00"
Max Working Pressure 10,000 psi 10,000 psi 10,000 psi 10,000 psi 10,000 psi 15,000 psi 10,000 psi
Max Working Temp 150ºC 150ºC 150ºC 150ºC 150ºC 175ºC 150ºC
Output Force Maximum output force 21,000 lbs with minimum 4,000 psi inlet pressure. Maximum output force 37,000 lbs with minimum 3,000 psi inlet pressure. Maximum output force 31,000 lbs with minimum 3,000 psi inlet pressure.. Maximum output force 55,000 lbs with minimum 2,000 psi inlet pressure. Maximum output force 60,000 lbs with minimum 3,000 psi inlet pressure. Maximum output force 55,000 lbs with minimum 3,000 psi inlet pressure. Maximum output force 55,000 lbs with minimum 3,000 psi inlet pressure.

You need to upgrade your Flash Player!
get Adobe Flash Player

This web site makes use of the Adobe Flash Player version 8 or newer.

 

For more information please click here to contact one of our sales team.